Kawai AnyTime X GP Service Manual page 21

● The.MIDI.does.not.work..
First,.refer.to. 〔4〕 . 【D】 .and.run.it.in.the.check.mode.
If.it.functions.normally,.the.problem.might.be.in.the.MIDI.device.connected.to.it.
If.it.does.not.function.normally,.try.the.following.solutions.
Possible.Cause.1.:.. A re.the.IN.and.OUT.terminals.correctly.connected?
Solution.1.:.. C heck the connection.
Possible.Cause.2.:.. T he.connector.may.be.disconnected.
Solution.1.:.. C heck all connectors and cables, as well as the LINE board.
Possible.Cause.3：. T he.switch.board.may.be.faulty..
Solution.1.:.. C heck the soldering surface of LINE board, as well as the board itself. If no
● No.sound.comes.from.the.headphone.
Possible.Cause.1 :.. I s.the.headphone.plug.not.fully.inserted?
Solution.1.:.. P lug it in firmly.
Possible.Cause.2 :.. T he.headphone.may.be.out.of.order..
Solution.1.:.. T ry to connect the headphone to another device and recheck.
Solution.2.:.. T ry to use another headphone.
Possible.Cause.3 :.. T he.connector.may.be.disconnected.
Solution.1.:.. C heck all connectors and cables as well as the LINE board.
Possible.Cause.4 :.. T he.switch.board.may.be.faulty..
Solution.1.:.. C heck the soldering surfaces of the LINE board, as well as the board itself. If
● The.switch.panel.is.tilted.toward.the.face.of.the.control.box..
Possible.Cause.1 :.. T here.is.a.problem.with.adjustment.of.the.assembly..
Solution.1.:.. R efer to 〔3〕 【D】 "Adjusting the Controller", and re-adjust the controller.
Possible.Cause.2 :.. S ome.mechanical.parts.may.be.distorted..
Solution.1.:.. C heck the exterior, and if nothing abnormal is found, replace the
Solution.2.:.. R efer to 〔6〕 【A】 , and disassemble the controller. If something abnormal is
● The.switch.panel.does.not.work.or.comes.out..
Possible.Cause.1：. T here.is.a.problem.with.adjustment.of.the.assembly..
Solution.1.:.. R efer to〔3〕 【D】 "Adjusting the Controller", and re-adjust the controller.
Possible.Cause.2：. A .mechanical.part.may.be.distorted..
Solution.1.:.. C heck the exterior, and if something abnormal is found, replace the
Solution.2.:.. R efer to〔6〕 【A】 , and disassemble the controller. If something abnormal is
clue is found, replace the board.
no clue is found, replace the board.
corresponding part referring to 〔6〕 【A】 .
found with a mechanical part, replace it.
corresponding part referring to〔6〕 【A】 .
found with a mechanical part, please replace it.
– 21 –