Kawai AnyTime X GP Service Manual page 32

【A-4】Control Panel (2)
6
6 6
6
4
5
5
Assembling.Instruction
＊ Refer.to.the.install.position.shown.in.the.drawing.below.
5
5
2
3
No.
1
– 32 –
1. Attach two pieces of double-sided adhesive tapes ③ on SW. PWB assy ② .
2. Fasten the SW. PWB assy on Control panel assy ① with four screws ⑤ .
3. ④ Fasten LCD PWB assy ④ with four screws ⑥ .
4. Insert the cable of LCD PWB assy ④ into the connector of SW. PWB assy ② .
Pasting.Position.of.Double-sided.Tape
The double-sided tape should cover all tactile switches on the SW. PWB assy.
Description Description
1. Control.Panel.Assy. Control.panel.assy
2. SW..PWB.Assy. SW..PWB.assy
3. Double-sided.Adhesive.Tape. Double-sided.adhesive.tape
4. LCD.PWB.assy. LCD.PWB.ASSY
+.BINDING.TAPTITE.SCREW.
5. +.Binding.taptite.screw.S.tite. M3.x.6.
S.TITE.
6. +.BINDING.MACHINE.SCREW. +.Binding.machine.screw
Remarks PN
See.A-4.(1)
KEP-268.(4) 238394.
3.x.85. 814204.
MSC-C162DYLY-9N.or. 814456.or.
511-1162-0501. 815646.
812255.
M2.x.6. 798266.