Paper Ejection Problems; Solving Problems Printing From A Computer; Nothing Prints - Epson WF-3012 User Manual

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing using the product
control panel, then press the
the product. Select the correct size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting in your printer software when you reprint.
Parent topic:
Related references
Paper Jam Problems in the Cassette
Paper Jam Problems in the Duplexer
Paper Jam Problems Inside the Product
Paper or Media Type Settings
Related tasks
Cancelling Printing Using a Product Button

Solving Problems Printing from a Computer

Check these sections if you have problems while printing from your computer.

Nothing Prints

Noise Occurs, But Nothing Prints
Noise When Product Sits for a While
Product Icon Does Not Appear in Windows Taskbar
Error After Cartridge Replacement
Printing is Slow
Parent topic:
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your product is turned on.
• Make sure any interface cables are connected securely at both ends.
• If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print,
connect your product directly to your computer instead of the hub.
paper feed button to eject the paper. Remove any paper remaining in
Solving Paper Problems
Solving Problems
125