Table of Contents
Advertisement
4. Remove any jammed paper from the rear cover.
5. Press in the buttons and reattach the rear cover.
6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam
message, check the other paper jam solution.
Parent topic:
Related tasks
Loading Paper in the Rear Paper Feeder
Cancelling Printing Using the Product
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
• If you are using letterhead paper, select the appropriate paper type setting.
Parent topic:
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Rear Cover
Solving Paper Problems
Solving Paper Problems
215
Advertisement
Table of Contents
