Table of Contents
Advertisement
A
1
2
15
Cleaning the spray arms
Dirt or calcium residue may block the nozzles on the
spray arms. For this reason, regularly check the spray
nozzles.
1
Lower spray arm
2
Upper spray arm
1. Remove the lower basket from the machine.
2. Pull off the lower spray arm in an upward direction
(
A
3.
Loosen the fastening screw of the upper spray arm
and pull off the spray arm (
4. Clean the spray arms under running water.
5. Replace the spray arms.
B
Warning
Ensure that the fastening screws are screwed tight.
Cleaning the filter inset in the water inlet hose
(depending on the model)
Dirt from deposits in the water pipes is prevented by a
filter in the water inlet hose. Check the filter and the water
inlet from time to time.
1. Close the water tap and unscrew the water inlet hose.
2. Take out the filter and clean it under running water.
3. Replace the cleaned filter.
4. Fasten the water inlet hose to the water tap again.
8
What if the dishwasher will not run:
Is the machine plugged in?
n
Are all fuses operative?
n
Is the water supply fully turned on?
n
Is the dishwasher door closed firmly?
n
Have you pressed the On/Off button?
n
Are the filters clogged?
n
).
Trouble shooting
B
).
Hide quick links:
Advertisement
Table of Contents
