Gram OM 62-00 T Instruction Manual page 19

Possible causes
- Improper loading
- Insufficient rinse aid supply
- Dishes are removed too soon
- Wrong programme selection
- Using cutlery with a low surface
quality
Possible causes
- Wrong programme selection
- Detergent is moist or clumping
- Using cutlery with a low surface
quality
Possible causes
- Insufficient rinse aid supply
17
The dishes are not becoming dry
How to fix these problems
- Load the dishwasher as suggested in this booklet.
- Increase the amount of rinse aid / refill the rinse aid dispenser.
- Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can escape. Begin
with unloading the dishwasher when the dishes are only
hand warm. Empty the lower basket first. This prevents
water from dripping off dishes in the upper basket.
- In short period programmes, the wash temperature and
therefore the cleaning performance is lower. Choose a
programme with a longer washing time.
- Water drainage is more difficult with these items. Cutlery or
dishes of this type is not suited to dishwashers.
Tea, coffee or other stains
How to fix these problems
- Select a programme which washes at a higher temperature
or takes longer.
- Bleaches in cleaners lose their efficacy when stored under
unfavourable conditions. Store detergents in a dry location.
Close the lid of the container carefully.
- Cleaning of these items is made difficult by their surface
structure. Cutlery or dishes of this type is not suited to
dishwashers.
Calcium streaks, misty
appearance
How to fix these problems
- Increase the amount of rinse aid / refill the rinse aid dispenser