Water Drainage; Electrical Connection - Gram OM 62-00 T Instruction Manual

3/4”
min 10
AQUASAFE+
max 100 cm
min 50 cm
min 4cm
AQUASAFE+ (depends on the model)
The Aquasafe+- system protects you from water damage
which may be caused at the water inlet hose.
Do not immerse the system’s valve box into water; it
contains electrical components.
In case of damage, pull out the power supply plug.
Do not shorten or lengthen the hose insert, since it
contains electrical cables and components.

Water drainage

Connecting the drainage hose.
Take care to ensure that the water intake hose is not bent
or squeezed.
Check that the drainage hose is firmly seated in place.
Extension hoses
If a hose extension is required, a drainage hose of equal
quality must be used
The maximum length must not exceed 4m. Otherwise,
the machine’s cleaning process is negatively influenced.
Siphon connection
The drainage height must be between 50 and 100 cm
above the floor.
Use hose clamps to fasten the drainage hose to the
siphon.

Electrical connection

Please refer to the type plate for information on current
type, mains voltage, and fuse protection.
The type plate is located on the inside of the door.
The mains plug must be freely accessible after installation.
Power cables and insulated cables must not be accessible
after installation.
24