Table of Contents
Advertisement
Quick Links
Model F586
Model F886
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
2M-307591
p/n
Rev. C
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
OWNERS MANUAL
BUILT-IN
ELECTRIC
AUTOLIFT
FRYERS
MODELS
F586
F686
F886
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
11
M313
304
0113
Advertisement
Table of Contents
Related Manuals for Wells F586
Summary of Contents for Wells F586
-
Page 1: Exploded View
Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment. -
Page 2: Shipping Damage Claim Procedure
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking prices charged by Wells Manufacturing for its products equipment manufactured by Wells Manufacturing is are based upon the limitations in this warranty. Seller’s warranted against defects in materials and workmanship obligation under this warranty is limited to the repair of... -
Page 3: Table Of Contents
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Manufacturing appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS POWER SWITCH IL2055 Fig. 1 Built-In Fryer Features & Operating Controls F586 Shown - F686 and F-886 Similar... -
Page 5: Precautions & General Information
PRECAUTIONS AND GENERAL INFORMATION DANGER: SEVERE BURN HAZARD Contact with hot oil will cause severe burns. Always wear protective clothing and heat resistant gloves when operating the fryer or filtering the oil. WARNING: ELECTRIC SHOCK HAZARD All servicing requiring access to non-insulated components must be performed by qualified service personnel. -
Page 6: Agency Listing Information
AGENCY LISTING INFORMATION This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions. STD 4 This appliance is Underwriters Laboratory recognized ( ). Since this appliance is only a single component of a complete installation, the finished installation of this unit requires additional evaluations to Underwriters Laboratory standards. - Page 7 30 amps. F-686 and F-886 fryers are shipped from the factory wired for three The ground lug of F586 phase. Conversion to single phase must be performed in the field by and F-686 fryers must be the electrician.
-
Page 8: Operation
OPERATION DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Always wear protective clothing and heat resistant gloves when operating the fryer. NORMAL OPERATION CAUTION: HOT SURFACE Be sure TEMPERATURE CONTROL KNOB is turned to OFF. Lower element head into frypot by pulling back on Exposed surfaces can be hot ELEMENT LIFTING HANDLE, raising ELEMENT HEAD to the touch and may cause... -
Page 9: Cleaning Instructions
CLEANING INSTRUCTIONS DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Allow the fryer to cool before cleaning. Always wear protective clothing and heat resistant gloves when cleaning the fryer. PREPARATION CAUTION: Turn temperature control and heat switch OFF Allow fryer to cool completely before cleaning SHOCK HAZARD Unplug fryer from receptacle before cleaning... -
Page 10: Disposal Of Used Oil
DISPOSAL OF USED OIL DANGER: BURN HAZARD Contact with hot oil will cause severe burns. Allow the fryer to cool before cleaning. Always wear protective clothing and heat resistant gloves when handling hot oil. PREPARATION CAUTION: Turn temperature control and heat switch OFF Allow fryer to cool completely before draining BURN HAZARD FREQUENCY... -
Page 11: Troubleshooting Suggestions
DESCRIPTION POSSIBLE PROBLEM SUGGESTED REMEDY Plug into proper receptacle. Reset Not plugged in or circuit breaker tripped circuit breaker Contact Wells Authorized Service Fuse blown Agency for repairs Power switch not ON Press heat switch ON Fryer will not heat... -
Page 12: Maintenance
MAINTENANCE Periodic cleaning is PERIODIC CLEANING necessary to remove Add 1/2 cup of granulated dishwasher detergent to frypot. Fill with water carbonization from the to the MAX OIL line. elements and frypot. Lower the element into the frypot and set the control knob to 225ºF Frypot may be cleaned by Boil the mixture for five minutes. -
Page 13: Exploded View & Parts List
AUTOLIFT COMMON COMPONENTS E7-WL0035 2C-35487 2V-305658 WS-50231 2 p laces 2I-31145 2 p laces 2A-31146 E7-31259 2U-30233 2K-31040 2E-30198 E7-30543 2A-33448 2A-30205 2C-35530 4 p laces 2C-30222 2A-30876 E7-30878 2 p laces WS-50850 2D-30215 Wells: Fryer Autolift Exploded View IL1728 7/12/10... - Page 14 EXPLODED VIEW & PARTS LIST F586 BUILT-IN SINGLE-HEAD AUTOLIFT FRYER - FRY HEAD COMPONENTS HEAD ASSY, COMPLETE, F586 WS-506902 (208V) WS-506903 (249V) 2I-Z12311 fiber washer 2R-37882 2C-30176 lock washer WS-55510 2J-30516 temp control amber 50172 2C-30157 2J-31157 2C-49689 WS-58656 hi-limit...
- Page 15 EXPLODED VIEW & PARTS LIST F586 BUILT-IN SINGLE-HEAD AUTOLIFT FRYER - CABINET COMPONENTS 2B-43688 1/2 size 2B-43689 full size 2C-33890 2A-32806 WS-50183 2C-31717 2D-301344 BASKET HOOKS see page 11 2E-34005 2E-33068 2C-31053 2C-35736 green KEPS 2C-41974 WS-50131 54769 2E-74098 2P-Z13854...
- Page 16 EXPLODED VIEW & PARTS LIST F686 BUILT-IN DUAL-HEAD AUTOLIFT FRYER - FRY HEAD COMPONENTS HEAD ASSY, COMPLETE, F-686 NOTE: Unit has two identical WS-62920 (208/240V) fryer heads. Only one is shown. 2I-Z12311 fiber washer 2R-34066 2C-30176 lock washer 2J-30516 2C-30172 2T-30133 amber temp control...
- Page 17 EXPLODED VIEW & PARTS LIST F686 BUILT-IN DUAL-HEAD AUTOLIFT FRYER - CABINET COMPONENTS 2C-33890 2C-31717 2A-32806 2B-43688 H6-33245 1/2 size 2B-43689 WS-53895 full size WS-50183 BASKET HOOKS see page 11 2D-301344 E7-Z13865 2E-33068 1O-31881 sleeve 2E-34005 requires 3' WS-50131 2C-31053 2C-41974 2E-34769 2P-Z13854...
- Page 18 EXPLODED VIEW: F886 F886 BULT-IN DUAL-HEAD AUTOLIFT FRYER - FRY HEAD COMPONENTS NOTE: Fryer has two identical fryer heads. Only one is shown. IL2053...
- Page 19 EXPLODED VIEW: F886 F886 BULT-IN DUAL-HEAD AUTOLIFT FRYER - CABINET COMPONENTS BASKET HOOKS 2 places see page 11 LIFT ASSEMBLY 2 places see page 11 28.1 IL2054a...
- Page 20 PARTS LIST: F886 F886 BUILT-IN DUAL-HEAD FRYER PARTS LIST Fig No Part No Description Application WS-62926 HEAD ASSY F88-6 208V STS 208V WS-62927 HEAD ASSY F88-6 240V STS 240V WS-62499 HEAD ASSY 480V F-856 480V 2R-37882 KNOB CONTROL ASSY AUTOFRY WS-55510 THERMO CTRL FRYER KP-715 2C-30157...
-
Page 21: Wiring Diagram
WIRING DIAGRAM... - Page 22 WIRING DIAGRAM...
- Page 23 WIRING DIAGRAM...
- Page 24 NOTES...
- Page 25 NOTES...
- Page 26 NOTES...
-
Page 27: Parts & Service
FRYPOT 2D-301344 service, or to order factory CRUMB CRADLE WS-20690 authorized replacement parts, COVER, FRYPOT E7-34421 contact your Wells authorized service agency, or call: Wells Manufacturing 10 Sunnen Dr., St. Louis MO 63143 USA Service Dept. phone: (314) 678-6314 fax:... - Page 28 WELLS MANUFACTURING 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.com...
Need help?
Do you have a question about the F586 and is the answer not in the manual?
Questions and answers