GAS LEAK CHECK
After connecting the pipe, check the joints for gas leakage with gas leak detector or soapy water.
FINISHING
• Wrap the piping joints with the pipe insulation and fasten it with vinyl tape. ( Figure. 17, 18)
• Fill the gap between the inside of wall sleeve and the pipe with a sealer so that rain and wind does not enter. ( Figure. 19 )
Pipe insulation
Pipe
(Vinyl tape)
Figure 17
Page 11
Pipe
Saddle
Figure 18
2004.3.30, 6:35 PM
Wall sleeve
Wall cap
Sealer(Putty)
Indoor side
Outdoor side
Wall
Figure 19
29