Section 6 - Troubleshooting
It is recommended that you enable WPA-PSK on your wireless router or access point before configuring your wireless
adapter. If you are joining an existing network, you will need to know the WPA-PSK key being used.
1. Open the Windows
®
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link DIR-635 User Manual
Configure WPA-PSK
XP Wireless Utility by right-clicking
80