Pptp - D-Link DIR 635 B3 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Mask:
Enter the Primary and Secondary DNS Server
addresses (Static PPTP only).
PPTP Gateway:
Enter the Gateway IP Address provided by your
ISP.
PPTP Server IP: Enter the Server IP provided by your ISP
(optional).
Username:
Enter your PPTP username.
Password:
Enter your PPTP password and then retype the
password in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or
Manual.
Maximum Idle Time:
Enter a maximum idle time during which the Internet
connection is maintained during inactivity.
This function does not apply if you have selected
Reconnect Mode as Always on.
D-Link DIR-635 User Manual
Internet Setup

PPTP

20