Initial Setup; Changing The Input Source; Source - Samsung Series 4+ User Manual

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic
settings. Press the
✎ If you connect any device to
changed to Set-top box automatically. If you do not want to select Set-top box, please select Aerial.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
You should do Setup
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby
mode, which resets the PIN to "0-0-0-0":

Source

TV / HDMI1 / HDMI2 / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite
receiver connected to the TV.
✎ Press the SOURCE
✎ Press the TOOLS
• Edit Name
You can set an external input source name you want.
• Information
You can see detailed information about the connected external device.
✎ The TV model is not allowed for PC connection (distortion or incorrect picture displaying can appear).
[PH4000-Africa]BN68-05788A-ENG.indb 9

Initial Setup

POWERP button. Setup is available only when the source is set to TV.
HDMI IN 1(STB)
→ System) again at home even though you did in shop already.
(MENU

Changing the Input Source

button. In the displayed Source list, connected inputs will be highlighted.
button.
before starting the installation, Channel Source will be
MUTE → 8 → 2 → 4 → POWER (on)
9
English
2014-01-17 9:15:23