Samsung Series 4+ User Manual page 20

Hide thumbs Also See for Series 4+:
Table of Contents

Advertisement

Basic Features
• DTS TruDialog
This function allows you to increase the intensity
of a voice over background music or sound
effects so that dialogue can be heard more
clearly.
• Equaliser
Use Equaliser to customize sound setting for
each speaker.
Balance: Adjusts the balance between the right
and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz
(Bandwidth Adjustment): Adjusts the level of
specific bandwidth frequencies.
Reset: Resets the equaliser to its default
settings.
Speaker Settings
→ Sound → Speaker Settings →
MENUm
O
ENTERE
• Auto Volume
To equalize the volume level on each channel,
set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making
almost no noise. It is useful at night.
✎ To use the volume control on the source
device connected to the TV, set Auto
Volume to Off on the TV. Otherwise, a
change to the volume control of the source
device may not be applied.
20
English
[PH4000-Africa]BN68-05788A-ENG.indb 20
Additional Settings
→ Sound → Additional Settings →
MENUm
O
ENTERE
• DTV Audio Level (digital channels only): This
function allows you to reduce the disparity
of a voice signal (which is one of the signals
received during a digital TV broadcast) to a
desired level.
✎ According to the type of broadcast signal,
MPEG / HE-AAC can be adjusted between
-10dB and 0dB.
✎ To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
• Dolby Digital Comp: This function minimizes
signal disparity between a dolby digital signal
and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
✎ Select Line to obtain dynamic sound, and
RF to reduce the difference between loud
and soft sounds at night time.
Line: Set the output level for signals greater or
less than -31dB (reference) to either -20dB or
-31dB.
RF: Set the output level for signals greater or
less than -20dB (reference) to either -10dB or
-20dB.
Reset Sound
→ Sound → Reset Sound →
O
MENUm
Reset all sound settings to the factory defaults.
ENTERE
2014-01-17
9:15:29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents