Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is set to TV.
✎
If you connect any device to
Set-top box automatically. If you do not want to select Set-top box, please select Aerial.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default password is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Setup
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0":
Changing the Input Source
Source
TV / Ext. / HDMI1 / HDMI2 / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver
connected to the TV.
✎
Press the
SOURCE
✎
Ext. always stays activated.
✎
Press the
TOOLS
•
Edit Name
You can set an external input source name you want.
•
Information
You can see detailed information about the connected external device.
✎
The TV model is not allowed for PC connection (distortion or incorrect picture displaying can appear).
[PH4000-RU]BN68-05792L-00L04.indb 9
HDMI IN 1(STB)
before starting the installation, Channel Source will be changed to
→ System) again at home even though you did in shop already.
(MENU
→ 8 → 2 → 4 →
MUTE
button. In the displayed Source list, connected inputs will be highlighted.
button.
POWER
(on)
English - 9
2014-02-03
7:21:58