Call Pickup; Voicemail; Intercom - Nortel 1210 User Manual

50

Call Pickup

You may pick-up an incoming call ringing at some other phone. This may be
done in either of two ways:
• Go off-hook, press the Right Navigation Key, press Pkup softkey, and
then enter the number of the phone that has an active incoming call on it
(ringing). Press Dial softkey.
• If you happen to have stored the number of the ringing phone as one of
your Speed Dial numbers, and that Line Icon is blinking
touch" call pickup is possible by simply pressing that Speed Dial key.
OPERATION
Pick up an incoming ringing call at
some other phone

Voicemail

This feature allows you to retrieve your voicemail. Each line may have a different
voicemail access number, and a different MWI-Uri may be configured for Each
Line. If a caller leaves a voicemail, the red light at the top of your phone (LED)
starts glowing and a message icon
instead of the line registered icon. This indicates that you have new messages in
your voicemail inbox. To retrieve a voicemail you have to pick up the Receiver or
press Headset or Handsfree button and then Press VM softkey. You may dial *99
or simply press the Message Feature Key which automatically connects you to
voicemail server (provided you have your voicemail inbox number pre-
configured). The *99 method is not available natively from the phone if * feature
codes are turned off in the phone's configuration.

Intercom

You can place an Intercom call that is automatically picked up by the other
phone. Audio flow is initially one-way, from the caller to the callee. The Intercom
call becomes a two-way call with full-duplex audio only if the remote party opts to
do so by pressing the Applications (Intercom) key on the called phone when an
incoming Intercom call is ringing on the called phone. An intercom call
disconnects automatically after a configurable timeout period (default 15
seconds) if the called party does not "accept" the call by pressing the
Applications key.
PROCEDURE
Go Offhook > Right Navigation Key >
Pkup > enter phone number > Dial
is displayed next to your specific line key
IP Phone 1200 SIP User Guide
, a "one-