Nic Indicator Codes; Power Supply Unit Indicator Codes - Dell DR4300 Owner's Manual

Drive-status indicator pattern (RAID only)
Flashes green for three seconds, amber for
three seconds, and then turns off after six
seconds
GUID-18C94A91-F205-4992-A1B2-BA2FF7C0D72E

NIC indicator codes

Each NIC on the back panel has an indicator that provides information about the network activity and link
status. The activity LED indicates whether the NIC is currently connected or not. The link LED indicates
the speed of the connected network.
Figure 4. NIC indicators
1. link indicator
Table 5. NIC indicators
Convention Status
A Link and activity indicators are off
B Link indicator is green
C Link indicator is amber
D Activity indicator is flashing green
GUID-FBD2281B-1608-4FF8-9AFE-4E33BB6FF810

Power supply unit indicator codes

AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator and DC
PSUs have an LED that serves as an indicator. The indicator shows whether power is present or a power
fault has occurred.
14
Condition
Rebuild stopped
2. activity indicator
Condition
The NIC is not connected to the
network.
The NIC is connected to a valid network
at its maximum port speed (1 Gbps or 10
Gbps).
The NIC is connected to a valid network
at less than its maximum port speed.
Network data is being sent or received.