Table of Contents
Advertisement
Figure 53. Installing the NDC
1.
captive screw socket (2)
3.
captive screw (2)
5.
network daughter card (NDC)
Next steps
1.
If applicable, install the expansion card(s) in the expansion card riser 2.
2.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Installing an expansion card into the expansion card riser 2 or 3
After working inside your system
128
2.
connector on the system board
4.
touch point (2)
6.
back panel slot for Ethernet connectors
Advertisement
Table of Contents
Troubleshooting
