Attaching The Tweco Weldskill 220A Mig Gun - Thermal Arc 211i Fabricator Operating Manual

FABRICATOR 211i INSTALLATION/SETUP

3.11 Attaching The TWECO WeldSkill 220A MIG Gun

Fit the MIG gun to the power source by pushing the MIG gun connector into the MIG gun adapter and screwing the
plastic nut clockwise to secure the MIG gun to the MIG gun adapter.
Connect the 8 pin plug by aligning he keyway then inserting the 8 pin plug into the 8 pin socket and rotate threaded
collar fully clockwise to lock the plug into position.
MIG Gun Adapter
MIG Gun Connector
8 pin socket
8 pin plug
Locking Screw
Wire Drive Tension Screw
Pressure Roller Arm
MIG Gun Connector
Inlet Guide
Art # A-11242 Outlet Guide
Figure 3-10: Attaching MIG Gun
INSTALLATION/SETUP 3-16 Manual 0-5157