Before First Use; Daily Use - Zanussi zop38903 User Manual

Before first use

Warning! Refer to the Safety chapters.
Initial cleaning
• Remove all accessories and removable shelf
supports (if applicable).
• Clean the appliance before first use.
Important! Refer to the chapter "Care and
cleaning".
Setting and changing the time
You must set the time before you operate
the oven.
When you connect the oven to the electrical
supply or after a power cut, the symbol
flashes.
Press the + or - button to set the correct time.
Changing the time
1. Press
again and again until the symbol
flashes.
2. Press the + or - button to set the correct
time.

Daily use

Warning! Refer to the Safety chapters.
Display
1
6
2
2 3
After approximately 5 seconds, the flashing
stops and the display shows the time of day
you set.
Preheating
Preheat the empty appliance to burn off the re-
maining grease.
1. Set the function
temperature.
2. Let the appliance operate for one hour.
3. Set the function
temperature.
4. Let the appliance operate for ten minutes.
5. Set the function
temperature.
6. Let the appliance operate for ten minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.
1
Cooking function
1
Temperature
2
Time
3
and the maximum
and the maximum
and the maximum
www.zanussi.com