Convergence Adjustments (Set Up 6) - Alignment Menu; Overview; Structure Of The Alignment Menu [C6]; Setting Lists Of The Alignment Menu - Sony Trinitron BVM-20G1U Operation Manual

Color video monitor
Hide thumbs Also See for Trinitron BVM-20G1U:
Table of Contents

Advertisement

Convergence Adjustments (SET UP 6) —
ALIGNMENT Menu

Overview

The ALIGNMENT menu is used for adjusting
convergence and geometry.
Structure of the ALIGNMENT Menu
Main Menu
Level 1
SET UP C
INPUT CONFIGURATION [C1]
REMOTE [C2]
PASSWORD [C3]
SYSTEM CONFIGURATION [C4]
ON SCREEN SET [C5]
ALIGNMENT [C6]
EXTEND MENU [C7]

Setting Lists of the ALIGNMENT Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 19.
• The arrow mark (÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
42
[C6]
Level 2
ROTATION (1/3)
H STATIC CONV (2/3)
H CV R C (3/3)
[C6] ALIGNMENT menu (1/3)
Adjust each item with the UP and DOWN buttons or
PHASE knob.
ROTATION: Compensates for the screen rotation
which occurs when the monitor is installed facing
north or south.
V SIZE: Adjust the height of the picture.
V CENTER: Adjust the vertical picture position.
H SIZE: Adjust the width of the picture.
H PHASE: Adjust the horizontal picture position.
H PIN: Correct side pincushion distortion.
H KEY: Correct trapezoid distortion.
SUB CONTRAST: Adjust the center value of the
contrast when the image size is changed.
This item can not be selected when 4:3-NORM is
selected in the SCREEN MODE menu.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents