Configuration Types - NetComm NB1300 Plus 4W User Manual

Configuration Types

This section is supplied to help you connect your NB1300 ADSL Modem quickly to your
network or Windows computer. The following are the most common configurations for using
your NB1300 ADSL Modem.
Basic ADSL Modem - Ethernet
Basic ADSL Modem - USB
Gateway - Ethernet
Gateway - USB
Refer to the instructions in one of the following sections for the configuration you wish to use.
If you wish to configure the NB1300 in a different way to the examples shown, please consult a
Network Specialist for more information.
Note: If the NB1300 has already been used, we strongly recommend you reset and flush
all settings of the unit by pressing and holding the RESET button on the rear of the
modem for 10 seconds. Wait for the RDY light to begin pulsing before continuing.
We also recommend you change your Router's password from the factory default
before connecting it to a network or the Internet. Refer to the "Admin Password"
section in the "Security" Menu.
Rev. 1 - YML672
NB1300_2 ADSL Modem
www.netcomm.com.au
Page 11