Cradlepoint COR IBR1100/IBR1150 Manual page 41

Rule Priority: Higher number rules overrule lower number rules.
Enabled: A rule can be enabled or disabled by selecting or deselecting the checkbox.
Click Submit to save your rule changes.
Default Network Filter Settings
Use Default Network Filter Settings together with Network WebFilter Rules to control website access. All of your networks are set to allow website access by
default. Select a network and click Edit to change the default filter settings.
Default Action: Select from the following dropdown options:
Allow Access (default)
Block Access
When a network is set to Allow Access, it will allow access to sites not specifically blocked in the WebFilter Rules.
When a network is set to Block Access, it will block access to sites not specifically allowed in the WebFilter Rules.
Filter URLs by IP Address: (Default: No) Changing this option to "Yes" will cause the router to perform a DNS lookup on URL entries, and the IP addresses will be
appended to the appropriate block/allow list. This can have the side effect of being very strict; sites that are hosted across many domains may need every domain added to
the list for full functionality.
MAC Address WebFilter Rules
MAC Address WebFilter Rules allow you to control access from a specific MAC address to external domains or websites.
The settings for the MAC Address WebFilter Rules section match those for the Network WebFilter Rules, except that you must assign a MAC address instead of a
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
41