Cradlepoint COR IBR1100/IBR1150 Manual page 142

Debug
Info
Warning
Error
Critical
Enable Logging to a Syslog Server: Enabling this option will send log messages to a specified Syslog server. After enabling, type the Hostname or IP address of the
Syslog server (or select from the dropdown menu).
Syslog Server Address: Select the Hostname or IP address from the dropdown menu, or type this in manually.
Include System ID: This option will include the router's "System ID" at the beginning of every log message. This is often useful when a single remote Syslog server
is handling logs for several routers.
Include UTF8 Byte Order Mark: The log message is sent using UTF-8 encoding. By default the router will attach the Unicode Byte Order Mark (BOM) to the
Syslog message in compliance with the Syslog protocol, RFC5424. Some Syslog servers may not fully support RFC5424 and will treat the BOM as ASCII text, which
will appear as garbled characters in the log. If this occurs, disable this option.
Log to attached USB stick: Only enable this option if instructed by a CradlePoint support agent. This will write a very verbose log file to the root level of an attached USB
stick. Please disable the feature before removing the USB stick, or you may lose some logging data.
Verbose modem logging: Only enable this option if instructed by a CradlePoint support agent.
Create support log: This functionality allows for a quick collection of system logging. Create this log file when instructed by a CradlePoint support agent.
Router Services
By default, router services (Enterprise Cloud Manager, NTP, etc.) connect to the router via the WAN. In some setups it makes sense to use the LAN instead. For example, if
your router is used strictly for 3G/4G failover behind another router, you may not want to use 3G/4G data unnecessarily. Select Use LAN Gateway to set your router
services to connect via the LAN.
LAN Gateway Address: Input the IP address of the LAN side connection. If this is a 3G/4G failover router operating behind another router, the LAN Gateway Address is the
IP address of that other router.
DNS Server and Secondary DNS Server: The primary and secondary DNS server numbers match the static DNS values (set at Network Settings → DNS). You can
leave the default values or set them manually here. (Changing these values also changes the static DNS values.)
Temperature (COR IBR1100/1150 only)
The COR IBR1100/IBR1150 includes an internal temperature sensor. Use this to track the internal temperature with alerts/logging. The router also has a mechanism to shut
down functions when the internal temperature is dangerously high (80 °C).
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
142