Cradlepoint COR IBR1100/IBR1150 Manual page 149

Alerts can be included for the following:
Firmware Upgrade Available: A firmware update is available for this device.
System Reboot Occurred: This router has rebooted. This depends on NTP being enabled and available to report the correct time.
Unrecognized MAC Address: Used with the MAC monitoring lists. An alert is sent when a new unrecognized MAC address is connected to the router.
WAN Device Status Change: An attached WAN device has changed status. The possible statuses are plugged, unplugged, connected, and disconnected.
Configuration Change: A change to the router configuration.
Login Failure: A failed login attempt has been detected.
VPN Tunnel Goes Down: Sends an alert when a VPN tunnel goes down.
Feature License Expiration: Sends an alert when a feature license is about to expire.
Full System Log: The system log has filled. This alert contains the contents of the system log.
Recurring System Log: The system log is sent periodically. This alert contains all of the system events since the last recurring alert. It can be scheduled for daily,
weekly and monthly reports (Frequency). You also choose the Time you want the alert sent.
SMTP Mail Server
Since your router does not have its own email server, to receive alerts you must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc.)
Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an example using Gmail:
Server Address: smtp.gmail.com
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
149