Cradlepoint COR IBR1100/IBR1150 Manual page 157

Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter. Enabling this service is not necessary when accessing
serial through SSH.
LAN: Enable serial redirector for LAN connections.
Authenticated LAN: Enable serial redirector for Authenticated LAN connections. You must be logged into the router to use the redirector.
WAN: Enable serial redirector for WAN connections.
Server Port: Enter a port number for the redirector to use. (Default: 7218)
USB Serial Adapter Configuration
Baud Rate: Select from the dropdown list.
50
75
110
134
150
200
300
600
1200
1800
2400
4800
9600
19200
Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8.
Parity: Change this value to enable parity bit checking. Select from the following dropdown options:
None: No parity checking. (Default)
Even: parity bit will always be even.
Odd: parity bit will always be odd.
Mark: parity bit will always be odd and always 1.
Space: parity bit will always be even and always 0.
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
157