Attach The Bell - Schwinn S-14 Cruiser Owner's Manual

ATTACH THE BELL

Note: Not all bicycles will come equipped with a bell.
❶ Place the bell assembly on top of the handlebar. Figure 3.21
❷ Place the bottom bracket under the handlebar, aligning the
holes in the bottom bracket with the holes in the top
bracket.
❸ Insert the screws up into the holes of the bottom bracket,
into the top bracket and tighten the screws with a small
phillips head screwdriver.
2
Bottom bracket
3
Screws
Assembly 3
1
Bell
assembly
Figure 3.21
29
29