The Soup Maker; A Glass Jar Assembly; Fitting; Removing - Cuisinart SSB I U Manual

The Soup Maker

A Glass Jar Assembly
Before first use, clean the glass jar thoroughly (see cleaning & maintenance section on page 15).
n
NB: The appliance may smoke a little and release a slight odour during first use, this is normal.
The glass jar assembly is one complete unit which includes glass jar, handle, cooking plate and collar.
n
NB: Do not attempt to remove the glass jar from the collar.

Fitting

To fit the glass jar assembly to the base of the Soup Maker, position jar unit on the motor base so that the
n
arrow on the jar collar is level with the arrow on the base (fig. 1). Push the jar down into place (fig. 2).
Glass Jar
Assembly
Motor
Base
Off
fig. 1
High
N.B. Take care when placing the glass jar on the motor base as incorrect positions may damage the interlock switch and
could prevent the unit from running.

Removing

Switch the Soup Maker off and unplug from the mains socket. Lift the glass jar up and away from the motor
base, holding the handle only. Do not twist the jar.
CAUTION: The heating element is hot when the Soup Maker is in heat mode, do not touch the underside
of the collar.
Blend
Stir
Heat
fig. 2
Time
Low Simmer
9