Travel Cup Operation; Chopping Cup Operation; Operating And Safety Tips - Cuisinart SmartPower CPB-300 Instruction And Recipe Booklet

traVeL Cup operatIon

1. Put food ingredients into the travel cup, and then attach blade
assembly.
Note: Blade assemblies are interchangeable based on recipes and
desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the
assembled travel cup onto the base and secure into place. The unit
automatically is activated and in Standby mode with the red POWER
LED illuminated and flashing.
3. For continuous blending, press the desired speed. The blue LED light
will illuminate, indicating that the blender is on and running. It is
possible to switch between High and Low speeds by simply pushing
the desired speed button.
4. To pause the blending process, press the activated speed button. The
blending process will stop. The red Standby indicator light will continue
to flash to let you know that the blender is still activated. To reengage
the unit, choose the desired speed.
5. When you have finished blending, press activated speed to put in
Standby mode. Remove the travel cup from the base. Unplug the unit.
6. Turn cup right side up, turn blade assembly counterclockwise to
remove. Attach travel cup lid by twisting clockwise.

CHoppIng Cup operatIon

1. Put food ingredients into chopper cup filling it to a maximum of
one-quarter of its capacity, then attach blade assembly.
Note: Blade assemblies are interchangeable based on recipes and
desired end results.
2. With the base unit on the tabletop and the unit plugged in, place the
assembled chopper cup onto the base and secure into place. The unit
automatically is activated and in Standby mode with the red POWER
LED illuminated and flashing.
3. To continuously chop, press High or Low speed.
4. To pulse, press Pulse and then desired High or Low speed.
5. When you have finished chopping, press activated speed to put in
Standby mode. Remove the chopping cup from the base. Carefully
remove food with a spatula. NEVER TOUCH THE BLADE ITSELF.
Unplug the unit.

operatIng and SafetY tIpS

• M ake sure the electrical outlet is rated at the same voltage as that
stated on the bottom of the blender motor base.
• Always use the blender on a clean, sturdy and dry surface.
• A lways operate the blender jar with the cover on. Place cover on firmly.
Keep the blender jar cover on the blender jar while blending.
• Don't put hands inside the blender jar when blender is plugged in.
• Don't remove blender jar or cups while unit is running.
• D on't place blade assembly onto motor base without the jar or
cup attached.
• Make sure blade assembly is tightly attached to jar or cups.
• Always remove blade assembly before cleaning.
• D on't twist blade assembly from blender jar or cups when
removing from motor base. Simply lift jar or cups from motor
base.
• U se a rubber or plastic spatula as needed, only when the blender is
turned off. Do not use any utensil inside the blender while motor is on.
• N ever use metal utensils, as damage may occur to the jar, cup or
cutting assembly.
• D on't store food or liquids in your blender jar.
• D on't overload blender jar or cups. If the motor stalls, turn the blender
off immediately, unplug the unit and let it cool for at least 15 minutes.
Then, remove a portion of the food and continue.
• D on't blend hot liquids or carbonated beverages in chopper and travel
cups.
• D on't use any container or accessories not recommended by Cuisinart.
Doing so may result in injury.
• To remove jar or cup lift straight up. Do not twist to remove.
• The jar, chopping cup and travel cups are not recommended for
microwave use.
5