Linking And Unlinking The Remote Keyless Entry Key Fob To Memory - Dodge Durango 2016 Owner's Manual

NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• To set a memory profile to your RKE Key Fob, refer to
"Linking And Unlinking The Remote Keyless Entry
Key Fob To Memory" in this section.
Linking And Unlinking The Remote Keyless Entry
Key Fob To Memory
Your RKE Key Fobs can be programmed to recall one of
two pre-programmed memory profiles by pushing the
UNLOCK button on the RKE Key Fob.
NOTE: Before programming your RKE Key Fobs you
must select the "Memory Linked To FOB" feature
through the Uconnect system screen. Refer to "Uconnect
Settings " in "Understanding Your Instrument Panel" for
further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169
To program your RKE Key Fobs, perform the following:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE: If a memory profile has not already been set, refer
to Programming The Memory Feature in this section for
instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release
the SET (S) button on the memory switch.
4. Within five seconds, push and release button (1) or (2)
accordingly. "Memory Profile Set" (1 or 2) will display
in the instrument cluster.
5. Push and release the LOCK button on the RKE Key
Fob within 10 seconds.
NOTE: Your RKE key fobs can be unlinked to your
memory settings by pushing the SET (S) button, and
within 10 seconds, followed by pushing the UNLOCK
button on the RKE key fob.
3