Enabling And Disabling Parksense - Dodge Durango 2016 Owner's Manual

234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: ParkSense will reduce the volume of the radio, if
on, when the system is sounding an audio tone.
Adjustable Chime Volume Settings
Rear chime volume settings can be selected from the
Customer-Programmable Features section of the Uconnect
System, refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" for further information.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense will retain its last known configuration state
through ignition cycles.

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with the ParkSense
switch.
When the ParkSense switch is pushed to dis-
able the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Driver
Information Display (DID)" in "Understanding Your
Instrument Panel" for further information. When the
gear selector is moved to REVERSE and the system is
disabled, the DID will display the "PARKSENSE OFF"
message for as long as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when ParkSense is
disabled or requires service. The ParkSense switch LED
will be OFF when the system is enabled. If the ParkSense
switch is pushed, and the system requires service, the
ParkSense switch LED will blink momentarily, and then
the LED will be ON.