Dodge Durango 2016 Owner's Manual page 459

4. If the gear selector is in Neutral, push and release the
ENGINE START/STOP button with the vehicle speed
below 5 mph (8 km/h) before the engine will shut off.
The ignition switch position will remain in the ACC
position.
NOTE: If the ignition switch is left in the ACC or RUN
(engine not running) position and the transmission is in
PARK, the system will automatically time out after 30
minutes of inactivity and the ignition will switch to the
OFF position.
ENGINE START/STOP Button Functions — With
Driver's Foot OFF The Brake Pedal (In PARK Or
NEUTRAL Position)
The ENGINE START/STOP button operates similar to an
ignition switch. It has four positions, OFF, ACC, RUN
and START. To change the ignition positions without
starting the vehicle and use the accessories, follow these
steps:
• Starting with the ignition in the OFF position.
• Push the ENGINE START/STOP button once to place
the ignition to the ACC position (DID will display
"ACC").
• Push the ENGINE START/STOP button a second time
to place the ignition to the RUN position (DID will
display "ON/RUN").
• Push the ENGINE START/STOP button a third time to
return the ignition to the OFF position (DID will
display "OFF").
STARTING AND OPERATING 457
5