462 STARTING AND OPERATING
To Manually Turn Off The Stop/Start System
STOP/START Off Switch
1. Push the STOP/START OFF switch (located on the
switch bank). The light on the switch will illuminate.
2. The "STOP/START OFF" message will appear in
Driver Information Display (DID). Refer to "Driver
Information Display (DID)" in "Understanding Your
Instrument Panel" for further information.
3. At the next vehicle stop (after turning off the STOP/
START system), the engine will not be stopped.
4. The STOP/START system will reset itself back to an
ON condition every time the ignition is turned off and
back on.
To Manually Turn On The Stop/Start System
Push the STOP/START OFF switch (located on the
switch bank). The light on the switch will turn off.
System Malfunction
If there is a malfunction in the STOP/START system, the
system will not shut down the engine. A "SERVICE
STOP/START SYSTEM" message will appear in the
Driver Information Display (DID). Refer to "Driver In-
formation Display (DID)" in "Understanding Your In-
strument Panel" for further information.