Linking And Unlinking The Remote Keyless Entry Transmitter To Memory - Dodge Ram Commercial2016 Owner's Manual

2. Adjust all memory profile settings to desired prefer-
ences (seat, side mirrors, adjustable pedals and radio
station presets).
3. Push and release the S (Set) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) or Driver Information Dis-
play (DID) will display which memory position has
been set.
NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• To set a memory profile to your RKE transmitter, refer
to "Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory" in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157
Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory
Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pushing the
UNLOCK button on the RKE transmitter.
NOTE: Before programming your RKE transmitters to
memory the feature has to be selected.
• If your vehicle is equipped with a touchscreen, you
must select the "Memory To FOB" feature through the
Uconnect system. Refer to "Uconnect Settings " in
"Understanding Your Instrument Panel" for further
information.
• If your vehicle is not equipped with a touchscreen, you
must select the "Key Fob Linked To Memory" feature
through the Electronic Vehicle Information Center
(EVIC) or Driver Information Display (DID). Refer to
"Electronic Vehicle Information Center (EVIC)" or
3