Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
CONVECTION RING ELEMENT
Refer to page 4-12 for the procedure for ac-
cessing the convection ring element.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across wire
connector terminals. The meter should
indicate between 33 and 37 Ω.
WARNING
Electrical Shock Hazard
CONVECTION FAN MOTOR
Refer to page 4-13 for the procedure for ac-
cessing the convection fan motor.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across wire
connector terminals. The meter should
indicate approximately 18 Ω.
5-2