Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
MEAT PROBE JACK
Star Washer
Meat Probe Jack Wires
Refer to page 4-15 for the procedure for ac-
cessing the meat probe jack.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across wire
connector terminals. The meter should indi-
cate approximately 78 Ω @ 60°F (15.6°C).
WARNING
Electrical Shock Hazard
BLOWER SPEED RESISTOR
Screw
Refer to page 4-16 for the procedure for ac-
cessing the blower speed resistor.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across wire
connector terminals.The meter should in-
dicate approximately 170 Ω.
5-6
Blower Speed
Resistor Wires