Removing The Broil Element And The Oven Temperature Sensor - KitchenAid KEBK171SSS Technical Education

REMOVING THE BROIL ELEMENT AND
THE OVEN TEMPERATURE SENSOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug oven or disconnect power.
2. Open the oven door.
Broil Element
3. To remove the broil element:
a) Remove the four screws from the front
and rear brackets (see the top right
photo).
Temperature Sensor
4-10
Broil Element Screws
b) Pull the broil element forward until you
can access the wire terminals.
c) Disconnect the orange and blue wire
connectors from the broil element ter-
minals and remove the element.
Broil Element Wires
BU OR
Broil Element
OR BU