HP StorageWorks x9300 Administrator's Manual page 91

NOTE: If you select Reject, the wizard will exit and the shell prompt will be displayed. You
can restart the Wizard by entering the command
/usr/local/ibrix/autocfg/bin/menu_ss_wizard or logging in to the server again.
6. If the specified hostname already exists in the cluster (the name was used by the node you
are replacing), the Replace Existing Server window asks whether you want to replace the
existing server with the node you are configuring. When you click Yes, the replacement node
will be registered.
7. After the server is registered, you will be asked whether you want to configure a passive agile
management console on the node. If the node being restored previously hosted the agile
management console, install the passive management console.
IMPORTANT: Configure a passive agile management console only if the agile management
console is enabled and an active agile management console is configured.
If you have configured a user network, enter a VIF IP address and netmask.
Configuring a file serving node using the original template 91