Loading Envelopes - Brother DCP-J172W User Manual

h
Slowly push the paper tray completely
into the machine.
i
While holding the paper tray in place,
pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).

Loading envelopes

About envelopes
 Use envelopes that weigh between 80 to
95 gsm.
 Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing multiple
envelopes.
IMPORTANT
DO NOT use the following types of
envelopes, as they will not feed correctly:
• That are of a baggy construction.
• That have windows.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
Occasionally you may experience paper
2
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
1
Loading envelopes
a
Before loading, press the corners and
2
sides of envelopes to make them as flat
as possible.
2
IMPORTANT
If envelopes are "double-feeding", put one
envelope in the paper tray at a time.
Loading paper
Double flaps
2
15
2