4.13.4 Fine adjust the print specifications (Adjust print parameters)
(1) Function
●Starts from the Print description screen.
●Current message print specifications "character height", "character width", "print start delay" and "Pulse rate
div. Factor" settings are easily set.
●Since changes to the set value are immediately reflected in the printing, the changes be easily confirmed while
printing.
●After setting in character units or mm units, fine adjust in scan units.
●When you want to input in mm units, input "Line speed" in the print specifications screen.
"Adjust print parameters" screen
Adjust print parameters
Message name [ ]
−
−
Character height (0∼99)
8 5
Character width (0∼3999)
−
0 0 0 2
(0∼9999)SC
Print start delay
−
0 0 0 0
Pulse rate div. Factor
−
0 0 1
[Stop ]
Com=0
+
+
+
+
(1/1∼1/999 Enter
+
denominator.)
2015.07.07 12:45
M
Startup
Manual
HOME
Change unit
Save
Back
●Set the print specifications 4-67