Stopping Ink Ejection By Pressing The Screen Button - Hitachi RX Instruction Manual

3.2.2 Stopping ink ejection by pressing the screen button

● Perform ink stop processing using the following procedure.
1
Press the Shutdown
A confirmation screen is displayed.
Solution To stop the ink jet, press <OK>.
Press OK .
●Wait for the status to change from "Stopping" to "Stop".
3-14 ●Shut down operation
→ OK .
Shutdown
2015.07.07 12:45
Com=0
M
Manual Shutdown
＝＝＝＝＝ Shutdown Process Confirmation
Shutdown will stop the ink jet.
OK
Press Shutdown .
＝＝＝＝＝
Close