Technical Data; Main Components - Power Craft 89034 Instruction Manual

Introduction
To get the most out of your new snow
blower, please read this manual and the
enclosed safety instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.

Technical data

Working width:
Working height:
Snow discharge:
10-15 metres (adjustable 190°)
Gears: 5 forward, 2 reverse, neutral
Blade cylinder diameter:
Engine: 4-stroke single-cylinder engine
Power rating:
Fuel: 95 octane unleaded petrol
Engine oil:
Starting method:
electric starter and recoil start

Main components

1. Drive clutch handle
2. Handle
3. Blade clutch handle
4. Cable
5. Fuel tank
6. Air filter
7. Muffler
56 cm
8. Flap
51 cm
9. Wing nut
10. Discharge chute
11. Blade cylinder
12. Runners
30 cm
13. Battery
14. Dipstick
6.5 hp
15. Drain plug
16. Wheels
SAE 15W40
17. Ignition lock
18. Chute turning handle
19. Gear stick
20. Work light
21. Primer
22. Throttle lever
23. Choke
24. Petrol cock
25. Ignition key
26. Ignition lock
27. Circuit relay
DK
NO
SE
FI
GB
DE
PL
ET
51