Technical Data; Main Components; Instruction Manual - Power Craft 89033 Instruction Manual

INSTRUCTION MANUAL

Introduction
To get the most out of your new snow blower,
please read this manual and the enclosed safety
instructions before use. Please also save the
instructions in case you need to refer to them at
a later date.

Technical data

Swept width:
Working height:
Capacity:
Snow discharge:
Gears:
Blade cylinder diameter:
Engine type:
4-stroke, single cylinder with 25° incline,
overhead valves and forced air cooling
Power rating:
Starter:
1700 m
10-15 metres
(adjustable 190 degrees)
5 forward, 2 reverse, neutral
ENGLISH
Fuel:
Engine oil: Ordinary 15/W40 engine oil, to be
filled before first use
Running time on full tank:

Main components

1. Intake
2. Runners
56 cm
3. Blade cylinder
51 cm
4. Impeller
3 /hour
5. Discharge pipe
6. Chute
7. Wing nut
8. Chute setting handle
30 cm
9. Split pin
10. Gear stick
11. Drive clutch handle
12. Blade clutch handle
5.5 hp
13. Engine
recoil
95 octane unleaded petrol
approx. 7 hours
31