Table of Contents
Advertisement
Right Side (Timer only):
1. To change the time on the right side, press and hold the "TEMP" button and the "START/
STOP" button on the right side for 3 seconds. The display above the "START/STOP"
button will change from the time to "_ _ _ _." Release the "TEMP" and "START/STOP"
buttons.
2. Press the "TEMP" button. The display will now be the current programmed time for the
"START/STOP" button.
3. Change and set the time by pressing and releasing or holding the "START/STOP"
button on the right side to change the time. The time will scroll forward from the current
programmed time. Once the time reaches 9:59, it will change to 0:00 and continue to
go forward. Hold the "START/STOP" button down for faster changing of the time.
4. Once the time is set, press and release the "TEMP" button.
THE TIME AND TEMPERATURE ARE NOW SET AND STORED FOR THE RIGHT
SIDE.
MONTHLY INSPECTION
Check all bolts/screws and tighten if necessary.
CLEANING
All surfaces except the cooking grids are stainless steel and can be cleaned with a warm,
damp cloth and detergent.
CAUTION
DO NOT IMMERSE OR LET THE UNIT STAND IN WATER.
DO NOT HOSE DOWN.
KEEP AWAY FROM RUNNING WATER.
To remove burned on grease or food residue use the following mixture:
1 Tablespoon liquid dish detergent
1 Cup of warm water
DAILY CLEANING PROCEDURES
Begin toaster cleaning procedure by using operating procedures within your organization, or
follow the steps below:
1. Turn toaster off, unplug the unit, and open the top lids to the first stop position and let sit
for a minimum of 20 minutes.
2. Scrape toaster with a spatula to remove loose food debris.
3. Pour 1/4 cup of above cleaning solution onto the bottom cooking surface of warm
toaster.
4. Immediately spread cleaning solution around the toaster with cleaning pad. Use
moderate pressure to scrape away burnt-on food.
5. Apply cleaning solution to cleaning pad.
6. Use moderate pressure to scrape away burnt-on food on top cooking surfaces.
7. Drain cleaning solution to grease trap.
8. Wipe off remaining cleaning solution with thick damp cloth until clean.
9. Empty and clean grease catcher cup as required using detergent and water after
removing cup from unit.
5
Advertisement
Table of Contents
