Sony LMD-9020 Features & Specifications

The LMD-9020 is a cost-effective addition to the 8.4-inch*
handheld-type LUMA Professional LCD Monitors,
offering the performance to replace CRT monitors
with the quality expected from the PVM-9L2 range.
The LCD panel of the LMD-9020 offers high resolution
and excellent color reproduction, combined with high
contrast and high brightness. This monitor also has a
wide viewing angle, plus a high level of robustness
thanks to its AR-coated protection panel.
As standard, the LMD-9020 accepts a variety of
analog formats from SD to HD. The unit can be AC,
DC, or battery powered. And, with its slim design and
half-rack width, the LMD-9020 can be conveniently
used on a lap, desktop, or mounted in a rack for ENG
and EFP operations, as well as in mobile applications
and studios. The LMD-9020 also offers the familiar
operational features inherited from the Sony PVM
Series of CRT monitors.
The combination of all these features makes the
LMD-9020 a perfect choice for a smooth migration
from CRT to LCD.
* Viewable area, measured diagonally
Features
Input Versatility
The LMD-9020 provides a range of analog
inputs as standard. For typical SD video
monitoring, analog composite (NTSC/PAL),
analog component/RGB (525/60i and
625/50i), and Y/C (S-Video) signals are
accepted. The LMD-9020 also accepts a
variety of analog progressive SD and HD
formats, including 480/60P and 576/50P,
and high-definition 1080/60i, 1080/50i,
720/50P and 720/60P. It can also accept
1080/24PsF.
High Picture Quality –
High Purity Panel
The LMD-9020 uses a VGA (640 x 480)
resolution LCD panel, with high purity color
filters. The result is high-brightness, high-
contrast images with precise color
reproduction. Also, the LMD-9020 provides
a wide 170-degree viewing angle, both
vertically and horizontally.
In addition, its robust AR-coated protection
layer minimizes the chance of the panel
being scratched during transportation – an
extremely important criteria for use in the
field or in any mobile application.
ENG KIT
The LMD-9020 is a strategic choice for use
in ENG and EFP field operations. When
compared to CRT displays, the picture
contrast of these monitors is much less
affected by ambient light, allowing clear
images to be viewed even under strong
sunlight. For further protection, the optional
VF-509 ENG kit provides a viewing hood,
carrying handle, and connector protector.
Convenient Installation
The LMD-9020 is 5U high and half-rack
wide. Using the optional MB-525 Mounting
Bracket with a nine-step tilt capability, two
units can be installed side-by-side in a 19-
inch EIA standard rack.
Input Signals
Input Signal
Total
System
Lines
575/50i 625
*
480/60i 525
480/60P 525
576/50P 625
1080/24PsF 1125
LMD-9020
1080/50i 1125
*
1035/60i 1125
*
1080/60i 1125
720/50P 750
720/60P 750
* Also accepts 59.94Hz field rate.

LCD Monitor

LMD-9020
Other Features
• 4:3/16:9 Switchable Display
• Selectable Scan Size
• Advanced Marker Settings
• Color Temperature/Gamma Selection
• Three-color Tally
• Parallel Remote Control
• Monaural Audio Monitoring
• Protected Controls
• Setup Level for Analog Component and
NTSC signal
• Sub Control on Contrast, Chroma, Phase,
and Brightness
• Blue-only mode
• Monochrome mode
• Power-saving Function
• 4:3 Zoom
Standard Interface
Composite
Active Line
Aspect Ratio
Y/C (x 1) Component (x 1)
575 16:9/4:3 O
483 16:9/4:3 O
483 16:9/4:3 —
576 16:9/4:3 —
1080 16:9 —
1080 16:9 —
1035 16:9 —
1080 16:9 —
720 16:9 —
720 16:9 —
RGB
O
O
O
O
O
O
O
O
O
O