Sanyo PLC-XF47 Service Manual page 66

Troubleshooting
No Power
●
● LED indication and error condition
Check the indicators for the projector condition.
The projector is operating normally.
Indicators
WARNING
LAMP READY
TEMP.
red green
red
• • • on
• • • dim
• • • off
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When
✽
this lights orange, replace the projection lamp a new one promptly. Reset the lamp counter after
replacing the lamp.
LAMP
REPLACE
orange
The projector is off. (The main switch is OFF position or the AC power cord is
unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to turn
✽
on the projector.
✽
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed
✽
and the READY indicator lights green.
✽ The projector is in the Power management mode.
• • • blinking at the normal rate
(approx. 1 second ON,
second OFF)
• • • blinking fast
(appro x 0.5 seconds ON, 0.5
seconds OFF)
Projector Condition
• • • blinking slow
2 seconds ON, 2 seconds
1
OFF)
- 66 - - 66 -
(approx.