Specifications And Requirements; Specifications - Yamaha F200B Owner's Manual

Specifications and requirements

EMU34521

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821K
Dimension:
Overall length:
F200BET 892 mm (35.1 in)
F200CET 868 mm (34.2 in)
F225BET 868 mm (34.2 in)
FL200BET 892 mm (35.1 in)
FL200CET 868 mm (34.2 in)
FL225BET 868 mm (34.2 in)
Overall width:
634 mm (25.0 in)
Overall height X:
F200BET 1805 mm (71.1 in)
F200CET 1829 mm (72.0 in)
F225BET 1829 mm (72.0 in)
FL200BET 1805 mm (71.1 in)
FL200CET 1829 mm (72.0 in)
FL225BET 1829 mm (72.0 in)
Transom height X:
643 mm (25.3 in)
Weight (SUS) X:
F200BET 272.0 kg (600 lb)
F200CET 283.0 kg (624 lb)
F225BET 278.0 kg (613 lb)
FL200BET 272.0 kg (600 lb)
FL200CET 283.0 kg (624 lb)
FL225BET 278.0 kg (613 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
9
Maximum output:
F200BET 147.1 kW@5500 r/min (200
HP@5500 r/min)
F200CET 147.1 kW@5500 r/min (200
HP@5500 r/min)
F225BET 165.5 kW@5500 r/min (225
HP@5500 r/min)
FL200BET 147.1 kW@5500 r/min (200
HP@5500 r/min)
FL200CET 147.1 kW@5500 r/min (200
HP@5500 r/min)
FL225BET 165.5 kW@5500 r/min (225
HP@5500 r/min)
Idle speed (in neutral):
650 ±50 r/min
Engine:
Type:
4-stroke V
Displacement:
3352.0 cm³
Bore × stroke:
94.0 × 80.5 mm (3.70 × 3.17 in)
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Control system:
Remote control
Starting system:
Electric starter
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance (cold engine) EX:
0.31–0.38 mm (0.0122–0.0150 in)
Min. cold cranking amps (CCA/EN):
711.0 A