Fuel Consumption Meter / Fuel Economy Meter / Twin Engine Speed Synchronizer - Yamaha F200B Owner's Manual

Instruments and indicators
The fuel flow meter displays gallons/hour or
G
liters/hour according to operator prefer-
ence. Select the desired units of measure-
ment by setting the selector switch on the
back of the gauge during installation.
1. Selector switch
The fuel consumption meter and fuel econ-
G
omy meter will indicate the same unit of
measurement.
Fuel flow readings are not accurate when the
engine is operating under about 1300 r/min.
As the fuel pump cycles on and off, the display
indicates either no fuel flow or higher flow than
the actual average use.
Dual engine users: the fuel flow meter can
display the fuel flow of either or both engines.
To change the fuel flow display, press the
" " (set) button repeatedly until the gauge
displays " " (for fuel flow to the starboard en-
gine only), " " (for fuel flow to the port engine
only), or " " (for total fuel flow both engines).
29
EMU36090
Fuel consumption meter / Fuel econo-
my meter / Twin engine speed syn-
chronizer
The display shows either the fuel consump-
tion meter, the fuel economy meter, or the
twin engine synchronizer.
To change the display, press the "
(mode) button repeatedly until the indicator on
the face of the gauge points to "
sumption meter), "
meter), or "
chronizer).
EMU26761
Fuel consumption meter
This gauge displays the total amount of fuel
consumed since the gauge was last reset.
To reset the total fuel consumption meter to
zero, press the "
buttons at the same time.
EMU26771
Fuel economy
This gauge displays the approximate distance
per liter or gallon when cruising.
ZMU01749
" (fuel con-
" (fuel economy
" (twin engine speed syn-
" (set) and " " (mode)
ZMU01751
"