Installation Requirements; Boat Horsepower Rating - Yamaha F200B Owner's Manual

Min. rated capacity (20HR/IEC):
100 Ah
Maximum generator output:
F200BET 42 A
F200CET 44 A
F225BET 44 A
FL200BET 42 A
FL200CET 44 A
FL225BET 44 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00(30/15)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F200BET T / M2
F200CET T / M
F225BET T / M
FL200BET TL / ML1
FL200CET TL / ML
FL225BET TL / ML
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane:
90
Recommended engine oil:
4-stroke outboard motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Total engine oil quantity (oil pan capacity):
5.6 L (5.92 US qt, 4.93 Imp.qt)
Lubrication:
Wet sump
Recommended gear oil:
Hypoid gear oil SAE#90
Specifications and requirements
Tightening torque for engine:
Noise and vibration level:
EMU33554
EMU33564

Boat horsepower rating

EWM01560
Overpowering a boat can cause severe in-
stability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boats
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.
Gear oil quantity:
F200BET 1.150 L (1.216 US qt,
1.012 Imp.qt)
F200CET 1.150 L (1.216 US qt,
1.012 Imp.qt)
F225BET 1.150 L (1.216 US qt,
1.012 Imp.qt)
FL200BET 1.000 L (1.057 US qt,
0.880 Imp.qt)
FL200CET 1.000 L (1.057 US qt,
0.880 Imp.qt)
FL225BET 1.000 L (1.057 US qt,
0.880 Imp.qt)
Spark plug:
25.0 Nm (2.55 kgf-m, 18.4 ft-lb)
Propeller nut:
55.0 Nm (5.61 kgf-m, 40.6 ft-lb)
Engine oil drain bolt:
28.0 Nm (2.86 kgf-m, 20.7 ft-lb)
Engine oil filter:
18.0 Nm (1.84 kgf-m, 13.3 ft-lb)
Operator sound pressure level (ICOMIA
39/94 and 40/94):
79.7 dB(A)

Installation requirements

WARNING
10