1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
EMU26091
Main switch
The main switch controls the ignition system;
its operation is described below.
"
" (off)
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
"
" (on)
G
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
"
" (start)
G
ON
ON
OFF
START
OFF
START
2
1
ZMU04564
ON
ON
OFF
START
OFF
START
3
2
1
ZMU05818
" (off) posi-
" (on) position,
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
3
OFF
OFF
EMU32053
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pushing the switch "
board motor up, and then tilts it up. Pushing
Components
" (on) position.
ON
START
ON
ON
OFF
START
OFF
START
ON
ON
START
OFF
START
" (up) trims the out-
" (start) po-
ZMU04567
ZMU04566
ZMU05821
20