VDO M5 User Manual page 36

M5
Settings – total ride time
The next digit on the left starts to flash and is ready
to be set.
Press the BIKE or TPC button to set the value of this digit.
Press the SET button to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the SET button.
The setting for the minutes is then opened.
Press the BIKE or TPC button to set the minutes.
Once the minutes have been set, confirm the setting by
pressing the SET button.
The response "Set OK" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M5 returns to function mode.
36